Your shopping cart is empty!
Product Code: | EOT-BLE100 |
Availability: | In Stock |
1.Master and slave mode
2.Built-in iBeacon protocol
3.Support Mesh networking mode
EOT-BLE100 is an ultra-low power V4.1 bluetooth module.It is used for point-to-point data transparent transmission.User'device can communicate immediately after simple setup without concerning about transport protocol.The module supports master and slave mode.User not only can use both master and salve for transparent transmission,also can develop APP on the basis of standard BLE protocol.The module supports one-to-many broadcast,and has built-in iBeacon protocol.User can make it an iBeacon equipment with simple setup.
Item
|
Value
|
|
Wireless Standard
|
802.15.1 | |
Frequency Range
|
2.402GHz-2.480GHz | |
Transmit Power
|
-18dBm to +3dBm | |
User can configure the power | ||
Receiving Sensitivity
|
-89dBm | |
Antenna Selection
|
External: I-PEX connector | |
Internal: on-board antenna | ||
Hardware Parameter
|
Data Interface
|
UART: 2400bps - 115200bps |
Working Voltage
|
1.9V~5.5V | |
Working Current
|
60nA~12mA | |
Working Temp
|
-40℃- 85℃ | |
Storage Temp
|
-40℃- 125℃ | |
Dimension
|
18.2×26.7×3(mm) | |
Software Parameters
|
Device Type
|
Master/slave device |
Security Mechanism
|
128 bit AES engine | |
Encryption
|
PC1 encryption | |
Working Mode
|
Master device,slave device,broadcast mode | |
Setting Command
|
AT+ command structure | |
User Configuration
|
Serial AT command,transparent transmission AT command | |
Application Software
|
Support customization |